ATH -1000-5000 Digital Spring Tester

 Function

The ATH spring pull pressure test stand is specially design for measuring the stretches and 

compression distortion value of spring, and the load relations characteristic. 

It is applied in measuring the working load of spring when it on the certain length stretched and compressed.

Parameter

1:Test spring max unsupported length: 10N~30N is 100mm, 50N~500N is 150mm, 1000N~5000N is 200mm

2:Max distortion value stroke: 10N~30N is 70mm, 50N~500N is 90mm, 1000N~5000N is 150mm
3:Distortion value resolution eH: 0.01mm
4:Distortion value display interface: Five figures and “-” position liquid crystal display; 
5:Max working load: According to measuring range; 
6:Load resolution eP: 0.02N
7:Platen diameter: 49mm
8:Shows value error: ±1%
9:Power source: Exchanges 220V-50Hz

10:Power: 13W

11:Operating temperature: 20±10℃

12: Storage and transport temperature: -27℃~+70℃
13:Relative humidity: 15%~80%RH. 

Specification and Parameter

Schematic Diagram

Frame of Display Ruler of Deflection