Test Stand
NANBEI Is Professional On Providing One-step Solution Of Laboratory Instruments And Equipment
ABQ Button Tester
Introduction
The button tester is configurable for NK, HF Push Pull Gauge and special jig. Dedicated to measure the buttons' clip force
or the collapsing force of detachment from clothing. Detecting the fixed strength of buttons is very important standard.
Especially in infants and children's clothing design and manufacturing is the most important. It needs strength instruments to note the measurement of the force in the fixed decorative button.
Purpose
The purpose of ABQ buttons testers is to define the responsibility of the garment manufacturers to ensure the button and push button and the fixed article can be properly fixed in the garment, preventing the buttons, etc, separate from clothing so that make the chance of dangerous that the baby swallow. Therefore, all garment button, and fixed decorative button
(The whole can be put into small objects measurement) are required detection by the button tester.
Meaning and function
1. The test method of this instrument is used to measure buttons and clothing for vertical tension tests,and button and push button don’t need to pull from clothing.
2. This method requires button sewing specification should be in accordance with the standard of button maker.
3. This test method is used to establish the relevance in different environment,as well as all kinds of different buttons and brand to make comparison.
4.This standard may contain hazardous materials, equipment. But we do not list all possible security problems in the using within standard. Therefore, the standard user’s responsibility is to create rules relevant safety and health, and determine the appropriate rules before using.
5. All the buttons are needed sewed tightly by chains stitching on fabric.
6. According the requirements of test, when the maximum button size is larger than or less/equals 6mm,buttons should inherit a tension of 90N or 50N respectively.
Technical data
Max load:300N
Storke:180mm
Dimension:260x360x700(mm)
Weight:20kg
Other product we can supply as follows:
|
AEV Electric Double Column
Vertical Test Stand
|
ASC Side Shake Screw
Test Stand
|
ASL Manual Vertical
(Horizontal) Dual Test Stand
|
 |
 |
 |
|
AEH Electric Horizontal
Test Stand
|
AMH Manual Horizontal
Test Stand
|
ABL Peel-off Force Test Stand
|
 |
 |
 |
Please feel free contact us if you have any question about our product.
Thanks.
